This week, the overall grades of 17 oil and gas stocks are lower, according to the Portfolio Grader database. Each of these rates a “D” (“sell”) or “F” overall (“strong sell”).
Top 5 Up And Coming Companies To Buy For 2015: Sterling Consolidated Corp (STCC)
Sterling Consolidated Corp., incorporated on January 31, 2011, is a holding company. The Company�� operations are conducted through its four subsidiaries: Sterling Seal & Supply, Inc. (Sterling Seal), ADDR Properties, LLC (ADDR), Q5 Ventures, LLC (Q5), and Integrity Cargo Freight Corporation (Integrity). The Company through its subsidiary, Sterling Seal engages primarily in the distribution and sale of O-rings, rubber seals, oil seals, custom molded rubber parts, custom Teflon parts, Teflon rods, O-ring cord, bonded seals, O-ring kits, and stuffing box sealant. The Company also owns real property through its subsidiaries ADDR and Q5. In addition, the Company�� subsidiary Integrity Cargo Freight Corporation (Integrity) is a freight forwarding business. In September 2013, the Company announced the acquisition of Superior Seals and Service in High Point, NC.
Sterling Seal sells directly to smaller distributors and original equipment manufacturers in need of seals. It offers a catalogue of standard sizes, and will take orders for special sizes not available in the standard catalogue. O-rings and the other products that Sterling Seal sells are used in a variety of industries, including automotive, pump, transmissions, oil and energy, machinery, and packaging. Integrity are primarily responsible for transporting products the Company order from its suppliers back to its warehouse in Neptune, NJ. After Sterling Seal confirms from its supplier that a product is ready to be picked up, Integrity Cargo is responsible for picking up the products and getting them to the dock and delivered to the Sterling Seal warehouse. ADDR owns a 28,000 square foot facility in Neptune, NJ. Q5 Ventures, LLC owns a 5,000 square foot facility in Apopka, Florida, which is used by Sterling Seal for its Florida operations.
Advisors' Opinion:- [By Peter Graham]
Small cap stocks Muscle Warfare International (OTCMKTS: MWAR), Portlogic Systems Inc (OTCMKTS: PGSY) and Sterling Consolidated Corp (OTCBB: STCC) were all the subject of a few paid promotions as recently as last week but they sure did not start the new week out right because all were sinking on Monday. So are these small cap stocks that are either the subject of promotions or investor awareness campaigns hot or not? Here is a quick reality check:
- [By Peter Graham]
Small cap stocks Pulse Network Inc (OTCBB: TPNI), Sterling Consolidated Corp (OTCBB: STCC) and diaDexus, Inc (OTCMKTS: DDXS) have or could start to sizzle for investors. However, I should also mention that two of these stocks have been the subject of paid promotions while a third apparently has not been, and could be the real deal. With that in mind, here is a closer look along with a quick reality check about all three small caps to help you decide whether they are hot or not:
10 Best Machinery Stocks To Invest In Right Now: Deutz AG (DEZ)
DEUTZ AG is a Germany-based manufacturer of diesel engines. The Company produces engines with outputs of between 19 kilowatts (kW) and 520 kW for on-road as well as non-road applications. Its activities cover development, design, production, sales and services for diesel engines that are cooled by water, oil or air. DEUTZ AG divides its activities into two segments: DEUTZ Compact Engines and DEUTZ Customized Solutions. DEUTZ Customized Solutions segment focuses on air-cooled engines and large liquid-cooled engines with capacities of more than eight liters. The segment DEUTZ Compact Engines comprises liquid-cooled engines with capacities of less than four liters as well as engines with capacities of four to eight liters. The Company is the executive and operating company within the DEUTZ Group. It has a global reach with its production sites, ten distribution companies, nine sales offices, as well as over 800 distribution and service partners in more than 130 countries worldwide. Advisors' Opinion:- [By Jonathan Morgan]
RWE AG (RWE) jumped 6.4 percent, leading a gauge of utilities higher. Deutz AG (DEZ) plunged the most in more than two years after an investor sold a 8.4 percent stake in the manufacturer of diesel engines. ProSiebenSat.1 Media AG (PSM) dropped 1.1 percent after Telegraaf Media Groep NV sold its stake in the company.
10 Best Machinery Stocks To Invest In Right Now: The Greenbrier Companies Inc (GBX)
The Greenbrier Companies, Inc. (Greenbrier), formerly Greenbrier Oregon, Inc., incorporated on October 24, 2005, are the designers, manufacturers and marketers of railroad freight car equipment in North America and Europe, a manufacturer and marketer of ocean-going marine barges in North America and a provider of wheel services, railcar refurbishment and parts, leasing and other services to the railroad and related transportation industries in North America. The Company operates in three business segments: Manufacturing; Wheel Services, Refurbishment & Parts; and Leasing & Services.
The Manufacturing segment, operating from facilities in the United States, Mexico and Poland, produces double-stack intermodal railcars, conventional railcars, tank cars and marine vessels.
The Wheel Services, Refurbishment & Parts segment performs wheel, axle and bearing servicing; railcar repair, refurbishment and maintenance activities; as well as production and reconditioning of a variety of parts for the railroad industry in North America. The Leasing & Services segment owns approximately 11,000 railcars and provides management services for approximately 219,000 railcars for railroads, shippers, carriers, institutional investors and other leasing and transportation companies in North America. The Company produces rail castings through an unconsolidated joint venture.
Manufacturing
The Manufacturing segment manufactures a broad array of railcar types in North America which includes railcar types other than coal cars. The primary products offered by the Company include Intermodal Railcars, Conventional Railcars, Tank Cars, European Railcar Manufacturing and Marine Vessel Fabrication. The Company manufactures a range of intermodal railcars. The important intermodal product is articulated double-stack railcar. The double-stack railcar is designed to transport containers stacked two-high on a single platform. The Company produces a range of boxcars, which are used in t! he transport of forest products, automotive, perishables, general merchandise and commodities. It also produces covered hopper cars for the grain, energy, sand and cement industries as well as gondolas for the steel and metals markets and various other conventional railcar types, including Auto-Max car.
The Company�� European manufacturing operation produces a variety of railcar (wagon) types, including a line of pressurized tank cars for liquid petroleum gas and ammonia and non-pressurized tank cars for light oil, chemicals and other products. It also produces flat cars, coil cars for the steel and metals market, coal cars for both the continental European and United Kingdom markets, gondolas, sliding wall cars and automobile transporter cars.
The Company�� Portland, manufacturing facility, located on a deep-water port on the Willamette River, includes marine vessel fabrication capabilities. It manufactures range of Jones Act ocean-going and river barges for transporting merchandise between ports within the U.S. including conventional deck barges, double-hull tank barges, railcar/deck barges, barges for aggregates and other heavy industrial products and dump barges. It focuses on the ocean-going vessels and coal carrying river barges although the facility has the capability to compete in other marine related products.
Wheel Services, Refurbishment and Parts.
Wheel Services, Railcar Repair, Refurbishment and Component Parts Manufacturing segment operates in the independent wheel services, repair, refurbishment and component parts networks in North America, operating in 39 locations. The wheel shops, operating in 12 locations, provide complete wheel services including reconditioning of wheels, axles and roller bearings in addition to new axle machining and finishing and axle downsizing. Its network of railcar repair and refurbishment shops, operating in 23 locations, performs heavy railcar repair and refurbishment, as well as routi! ne railca! r maintenance. It is engaged in the repair and refurbishment of railcars for third parties, as well as of its own leased and managed fleet. Its component parts facilities, operating in four locations, recondition railcar cushioning units, couplers, yokes, side frames, bolsters and various other parts. It also produces roofs, doors and associated parts for boxcars.
Leasing and Services
Leasing-The Company offers flexible financing programs including operating leases and by the mile leases to the customers . The Company leases are full service leases whereby the Company is responsible for maintenance and administration. Maintenance of the fleet is provided, in part, through its own facilities and engineering and technical staff.
Management Services- management services business offers a broad array of software and services that include railcar maintenance management, railcar accounting services, such as billing and revenue collection, car hire receivable and payable administration, total fleet management including railcar tracking using software, administration and railcar remarketing. The Company provide management services for a fleet of approximately 230,000 railcars for railroads, shippers, carriers, institutional investors and other leasing and transportation companies in North America.
Advisors' Opinion:- [By Jake L'Ecuyer]
Top Headline
The Greenbrier Companies (NYSE: GBX) reported a 13% gain in its fiscal second-quarter earnings. Greenbrier's quarterly profit surged to $15.6 million, or $0.50 per share, versus a year-ago profit of $13.8 million, or $0.45 per share. Excluding one-time items, it earned $0.51 per share. Its revenue climbed 88% to $502.2 million. However, analysts were expecting earnings of $0.60 per share on revenue of $508.69 million. - [By Monica Gerson]
The Greenbrier Companies, Inc.(NYSE: GBX) shares rose 9.51% to $54.00 in pre-market trading after the company reported better-than-expected earnings for its first fiscal quarter and raised its earnings forecast for FY 2015.
- [By Monica Gerson]
The Greenbrier Companies (NYSE: GBX) is projected to report its Q3 earnings at $0.74 per share on revenue of $571.07 million.
UniFirst (NYSE: UNF) is estimated to report its Q3 earnings at $1.42 per share on revenue of $349.24 million.
10 Best Machinery Stocks To Invest In Right Now: Flowserve Corp (FLS)
Flowserve Corporation, incorporated on May 1, 1912, is a manufacturer and aftermarket service provider of flow control systems. The Company develops and manufacture precision-engineered flows control equipment integral to the movement, control and protection of the flow of materials in its customers' critical processes. The Company operates in three segments: Engineered Product Division (EPD), which includes long leads time, custom and other engineered pumps and pump systems, mechanical seals, auxiliary systems and replacement parts and related services, Industrial Product Division (IPD), which includes pre-configured engineered pumps and pump systems and related products and services, and Flow Control Division (FCD), which includes engineered and industrial valves, control valves, actuators and controls and related services. Effective December 10, 2013, Flowserve Corp acquired Innovative Mag-Drive LLC.
Through the Company's manufacturing platform and global network of Quick Response Centers (QRCs), the Company offers an array of aftermarket equipment services, such as installation, advanced diagnostics, repair and retrofitting. The Company's product portfolio of pumps, valves, seals, automation and aftermarket services supports global infrastructure industries, including oil and gas, chemical, power generation and water management, as well as certain general industrial markets where the Company's products and services add value. The Company sells its products and services to more than 10,000 companies, including some of the engineering, procurement and construction firms (EPC), original equipment manufacturers, distributors and end users.
Engineered Product Division
The Company designs, manufactures, distributes and services engineered pumps and pumps systems, mechanical seals, auxiliary systems, replacement parts and related equipment. The business primarily consists of long lead time, engineered, configured products, which require extensive test requirements a! nd project management skills. EPD products and services are primarily used by companies that operate in the oil and gas, power generation, chemical, water management and general industries. The Company markets its pump and mechanical seals products through its global sales force and its regional QRCs and service and repair centers or through independent distributors and sales representatives. A portion of the Company's mechanical seal products are sold directly to original equipment manufacturers for incorporation into rotating equipment requiring mechanical seals. The Company's pump products are manufactured in a range of metal alloys and with a variety of configurations to meet the critical operating demands of the Company's customers.
The Company also manufactures a gas-lubricated mechanical seal that is used in high-speed compressors for gases pipelines and in the oil and gas production and process markets. The Company's products are manufactured at 29 plants worldwide, nine of which are located in Europe, 11 in North America, four in Asia Pacific and five in Latin America. The Company also conducts business through strategic foreign joint ventures. The Company has six unconsolidated joint ventures that are located in China, India, Japan, Saudi Arabia, South Korea and the United Arab Emirates, where a portion of its products are manufactured, assembled or serviced in these territories. The Company manufactures more than 40 different active types of pumps and approximately 185 different models of mechanical seals and sealing systems.
The Company's EPD products include between bearings pumps, which include single case- axially split, single case- radially split, double case; overhung pumps, which includes api process; positive displacement pumps, which includes multiphase, reciprocating and screw; mechanical seals and seal support systems, which includes gas barrier seals and dry-running seals, and specialty products, which includes nuclear pumps, nuclear seals, cryogenic p! umps, cry! ogenic liquid expander, hydraulic decoking systems, and API slurry pumps. The Company�� EPD Brand Names include BW Seals, Byron Jackson, Calder Energy Recovery Devices, Cameron, Durametallic, Five Star Seal, Jeumont-Schneider, and Interseal. EPD Services includes provision of engineered aftermarket services through its global network of 128 QRCs, some of which are co-located in manufacturing facilities, in 41 countries. Its EPD service personnel provide a comprehensive set of equipment services for flow management control systems, including installation, commissioning, repair, advanced diagnostics, re-rate and retrofit programs, machining and comprehensive asset management solutions. The Company provides asset management services and condition monitoring for rotating equipment through special contracts with many of its customers that reduce maintenance costs.
Industrial Product Division
The Company designs , manufactures, distributes and services pre-configured engineered pumps and pumps systems, including submersible motors, for industrial markets. IPD's standardized, general purpose pump products are primarily utilized by the oil and gas, chemical, water management, power generation and general industries. The Company's products are manufactured in 12 manufacturing facilities, three of which are located in the United States and six in Europe. IPD operates 20 QRCs worldwide, including 11 sites in Europe, three in the United States , five in Asia Pacific and one in Latin America. The Company manufactures approximately 40 different active types of pumps available in a wide range of metal alloys and non-metallics with a variety of configurations. The products includes Overhung, which includes Chemical Process ANSI and ISO, Industrial Process , and Slurry and Solids Handling ; Specialty Products, which includes Molten Salt VTP Pump, Submersible Pump, Thruster, Geothermal Deepwell, and Barge Pump; Between Bearings, which includes Single Case- Axially Split and Single Case- Radia! lly Split! ; Vertical, which includes Wet Pit, Deep Well Submersible Motor, Slurry and Solids Handling, and Sump; Positive Displacement, which includes Gear. The Company�� brands include Aldrich, Durco, IDP, Pacific, Pleuger, Scienco, Sier Bath, Western Land Roller, TKL, Worthington, and Worthington-Simpson. The Company markets its pump products through its worldwide sales force and its regional service and repair centers or through independent distributors and sales representatives. The Company provide an array of aftermarket services including product installation and commissioning services, spare parts, repairs, re-rate and upgrade solutions, advanced diagnostics and maintenance solutions through its global network of QRCs.
Flow Control Division
The Company�� FCD designs, manufactures, distributes and services a portfolio of industrial valve and automation solutions, including isolation and control valves, actuation, controls and related equipment. In addition, FCD offers energy management products, such as steam traps, boiler controls and condensate and energy recovery systems. FCD products are used to control, direct and manage the flow of liquids and gases and are an integral part of any flow control system. The Company's valve products are often customized and engineered to perform specific functions within each customer's unique flow control environment. The Company's flow control products are primarily used by companies operating in the chemical (including pharmaceutical), power generation (nuclear, fossil and renewable), oil and gas, water management and general industries (including aerospace, pulp and paper and mining). FCD has 58 sites worldwide, including 25 principal manufacturing facilities ( five of which are located in the United States and 13 of which are located in Europe) and 33 QRCs, including three consolidated joint ventures. A small portion of the Company's valves are also produced through an unconsolidated joint venture in India.
The Company's pr! oducts ar! e used in a variety of applications, from general service to the severe and demanding services, including those involving high levels of corrosion, extreme temperatures and/or pressures, zero fugitive emissions and emergency shutdown. The Company's smart valve and diagnostic technologies integrate sensors, microprocessor controls and software into high performance integrated control valves, digital positioners and switchboxes for automated on/off valve assemblies and electric actuators. These technologies permit real-time system analysis, system warnings and remote indication of asset health. These technologies have been developed in response to the growing demand for reduced maintenance, improved process control efficiency and digital communications at the plant level. The Company's valve automation products encompass a range of pneumatic, electric, hydraulic and stored energy actuation designs to take advantage of whatever power source the customer has available.
The Company�� products includes valve automation systems, control valves, ball valves, gate valves, globe valves, check valves, lined plug valves, lubricated plug valves, diagnostic software, digital positioners, pneumatic positioners, intelligent positioners, pneumatic actuators, hydraulic actuators, diaphragm actuators, direct gas and gas-over-oil actuators. steam traps, boiler controls, digital communications, and valve and automation repair services. The Company�� brands include Accord, Anchor/Darling, Argus, Atomac, Durco, Edward, Flowserve, Gestra, Kammer, Limitorque, McCANNA/MARPAC, NAF, NAVAL, Noble Alloy, Norbro, Nordstrom, PMV, Serck Audco, Schmidt Armaturen, Valbart, Valtek, Vogt, and Worcester Controls. The Company provides equipment maintenance services for flow control systems, including advanced diagnostics, repair, installation, commissioning, retrofit programs and field machining capabilities.
The Company competes with Sulzer Pumps, Ebara Corp., SPX Corp., Eagle Burgmann, A. W. Chesterton Co. an! d AES Cor! p, John Crane Inc., and Weir Group Plc, ITT Industries, KSB Inc., Sulzer Pumps, Pentair Ltd., Cameron International Corp., Emerson Electric Co., General Electric Co. and Crane Co.
Advisors' Opinion:- [By Ben Levisohn]
Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.
- [By Holly LaFon]
Flowserve Corp. (1.1%) (FLS)($70.52 - NYSE) is one of the largest global pump companies, serving the petroleum, chemical, and power industries. The company�� products include engineered and industrial pumps, automated and control valves, actuators, and seals. About 40% of FLS revenues are derived from the oil and gas industry, and should benefit from the refurbishment of the aging refineries in developed countries and the first time build out of the infrastructure in developing nations around the world. Further, oil companies are bringing up dirtier, heavier, and harder to access crude from thousands of feet below ground, as the cleaner, lighter, and easier to obtain crude that is closer to the surface is depleted. This demands more highly engineered pumps, valves, and seals that can work under very high pressure, high temperature, or underwater, boding well for FLS products.
- [By John Udovich]
Mid cap oil services stocks Dresser-Rand Group Inc (NYSE: DRC) and�Flowserve Corp (NYSE: FLS) and small cap Propell Technologies Group Inc (OTCBB: PROP) are all direct or indirect players in the enhanced oil recovery (EOR) sector among other niches. Of course, it might seem strange to be talking about oil services or enhanced oil recovery stocks when the bottom has fallen out from under the price of oil but consider the following two charts from WTRG Economics�and Gasbuddy.com:
10 Best Machinery Stocks To Invest In Right Now: Actuant Corp (ATU)
Actuant Corporation, incorporated on October 26, 1910, is a global diversified company that designs, manufactures and distributes a range of industrial products and systems to various end markets. The Company operates four business segments: Industrial, Energy, Electrical and Engineered Solutions. The Industrial segment is primarily involved in the design, manufacture and distribution of branded hydraulic and mechanical tools to the maintenance, industrial, infrastructure and production automation markets. The Energy segment provides joint integrity products and services, as well as rope and cable solutions to the global oil and gas, power generation and other energy markets. The Electrical segment is primarily involved in the design, manufacture and distribution of a range of electrical products to the retail DIY, wholesale, original equipment manufacturer (OEM), solar, utility, marine and other harsh environment markets. The Engineered Solutions segment provides engineered position and motion control systems to OEMs in various on and off-highway vehicle markets, as well as, a range of other products to the industrial and agricultural markets. In August 2013, the Company announced the completion of its acquisition of Viking SeaTech (Viking).
Industrial
The Industrial segment is a global supplier of branded hydraulic and mechanical tools to a broad array of end markets, including general maintenance and repair, industrial, infrastructure and production automation. The Company's primary products include hydraulic tools, engineered heavy lifting solutions, workholding (production automation) solutions and concrete stressing products. These hydraulic and mechanical tools are marketed primarily through the Company's Enerpac, Simplex, Precision Sure-Lock and Milwaukee Cylinder brand names. The high-force hydraulic and mechanical tools, including cylinders, pumps, valves, specialty tools and presses.
The Company's hydraulic tools operate at high pressures of approxim! ately 5,000 to 12,000 pounds per square inch and are generally sold by a diverse group of industrial and specialty fluid power distributors to customers in the infrastructure, mining, steel mill, cement, rail, oil and gas and general maintenance industries. Key industrial distributors include W.W. Grainger, Applied Industrial Technologies and MSC. In addition to providing a line of industrial tools, the segment also provides hydraulic systems (integrated solutions) to meet customer specific requirements for safe and precise control of movement and positioning. These customized heavy lifting solutions, which combine hydraulics, steel fabrication and electronic controls with engineering and application knowledge, are typically utilized in major infrastructure projects (bridges, stadiums, tunnels and offshore platforms) for heavy lifting, launching & skidding or synchronous lifting applications.
The Industrial segment has leveraged production and engineering capabilities to also offer a range of workholding products (work supports, swing cylinders and system components) that are marketed through distributors to the automotive, machine tool and fixture design markets. In addition, the segment designs, manufactures and distributes concrete pre- and post-tensioning products (chucks and wedges, stressing jacks and anchors) which are used by concrete tensioning system designers, fabricators and installers for the residential and commercial construction, railroad, bridge, infrastructure and mining markets.
Energy
The Energy segment provides technical products and services to the global energy markets, where safety, security, reliability and productivity are key value drivers. Products include joint integrity tools and connectors for oil & gas and power generation installations, as well as rope and cable solutions. In addition to these products, the Energy segment also provides manpower services, including machining, engineering and maintenance activities. The products and ! services ! of the Energy segment are distributed and marketed under various brand names (principally Hydratight, D.L. Ricci, Morgrip, Cortland, FibronBX, Puget Sound Rope, Biach, Selantic and Jeyco) to OEMs, maintenance and service organizations and energy producers in emerging and developed countries.
Joint integrity products include hydraulic torque wrenches, bolt tensioners and portable machining equipment. These products are used in the maintenance of bolted joints on oil rigs and platforms, wind turbines, refineries and pipelines, petrochemical installations, as well as fossil fuel and nuclear power plants. The Energy segment also provides rope and cable solutions that maximize performance, safety and efficiency for customers in various markets, including oil and gas, heavy marine, subsea, ROV and seismic. With its global design and manufacturing capabilities the Cortland business is able to provide customized synthetic ropes, heavy lift slings, specialized mooring, rigging and towing systems, electro-optical-mechanical cables and umbilicals to customers, including firms, such as CGG Veritas, Expro and Sercel. These products are utilized in critical applications, often deployed in harsh operating conditions (sub-sea oil & gas production, maintenance and exploration) and are required to meet robust safety standards. In addition custom designed products are also sold into a range of other niche markets including medical, security, aerospace and defense.
Electrical
The Electrical segment is involved in the design, manufacture and distribution of a broad range of electrical products to the retail DIY, OEM, electrical distribution, power transformation and harsh environment electrical markets. The Electrical segment sells its products through a combination of distributors, direct sales personnel and manufacturers' representatives. The Electrical segment provides the retail DIY market with a range of electrical tools and consumables, such as wire strippers, electrical meters,! connecto! rs, terminals, cable ties, staples and other wire management products and conduit bending equipment under the Gardner Bender, Del City and A.W. Sperry brands. These products are sold to retailers, such as Lowe's, The Home Depot, Menards, True Value and Ace Hardware, as well as numerous electrical distributors and OEM's.
The Electrical segment sells power transformation products in North America, including low voltage, single-phase dry type transformers and custom toroidal transformers under the Acme Electric brand name and high voltage switches under the Turner Electric brand name. These transformers are sold through electrical wholesale distributors, as well as directly to OEMs, such as Rockwell Automation, Eaton, Yaskawa and General Electric. Product offerings also include electrical components and systems for the harsh environment and marine markets under the Ancor, Marinco, Guest, Mastervolt and B.E.P Marine brand names. These products are primarily sold to various customers in the industrial, marine, power generation, industrial and retail markets, including West Marine, Applied Materials and Kohler. Solar products (primarily high efficiency solar inverters for residential and small commercial applications) are sold through local distributors and installers.
Engineered Solutions
The Engineered Solutions segment is a global designer and assembler of customized position and motion control systems and other industrial products to various transportation and other niche markets. This segment focuses on providing technical and engineered products, including actuation systems, mechanical power transmission products, engine air flow management solutions and rugged electronic instrumentation. Products in the Engineered Solutions segment are primarily marketed directly to OEMs through a technical sales organization. Approximately 55% of this segment's revenue comes from the vehicle systems product line (Power-Packer, Gits and Power Gear brands), which is sold to the t! ruck, aut! omotive, off-highway and specialty vehicle markets. Products include hydraulic cab-tilt and latching systems, which are sold to global heavy duty truck OEMs, such as Volvo, Iveco, Scania, Paccar-DAF and CNHTC and electro-hydraulic convertible top latching and actuation systems. The automotive convertible top actuation systems are utilized on both retractable soft and hard top vehicles manufactured by OEMs, such as Daimler, Volkswagen, Renault, Peugeot, BMW, Volvo and Nissan.
The Company's diesel engine air flow solutions, such as exhaust gas recirculation (EGR) systems, are used by diesel engine and turbocharger manufacturers to reduce emissions, improve fuel efficiency and horsepower. Primary end markets include heavy duty truck and off-highway equipment serving customers, such as Caterpillar, Cummins, Honeywell and Borg Warner. It also sells actuation systems to various specialty vehicle OEMs (principally in the defense, recreational vehicle and off-highway markets), such as Oshkosh and Fleetwood.
The Maxima Technologies tuck-in acquisitions of Turotest Medidores Ltda and CrossControl AB, along with the fiscal 2011 acquisition of Weasler Engineering have further diversified the geographic presence, technologies and end markets of the Engineered Solutions segment. The range of products, technologies and engineered solutions of Weasler Engineering, Maxima Technologies, Elliott Manufacturing, Sanlo and Nielsen Sessions comprise the other product line within the segment. Products include severe-duty electronic instrumentation (including displays and clusters, machine controls and sensors), power transmission products (engineered power transmission components, including drive shafts, torque limiters, gearboxes, torsional dampers and flexible shafts), and a comprehensive line of case, container and industrial hardware. These products are sold to a range of niche markets, including agricultural implement, lawn & turf, construction, forestry, industrial, aerospace, material handling! and secu! rity.
Advisors' Opinion:- [By Rich Duprey]
Choosing to focus instead on its industrial, energy, and engineered solutions segments, diversified industrial specialist Actuant (NYSE: ATU ) is jettisoning its electrical division, a move it expects to be completed in fiscal year 2014.
10 Best Machinery Stocks To Invest In Right Now: CNH Industrial NV (CNHI)
CNH Industrial NV is a Netherlands-based company primarily engaged in the manufacture of heavy machinery and vehicles equipment. It divides its activities into four main businesses. The Agricultural Equipment offers agricultural equipment under the New Holland Agriculture, Case IH brands and the Steyr brand. The Construction Equipment produces excavators, bulldozers, backhoes, compactors and other construction equipment under the New Holland Construction and Case Construction Equipment brands. The Trucks & Commercial Vehicles manufactures trucks and a commercial vehicles, including buses, coaches and special vehicles under Iveco, Iveco Bus and Heuliez Bus brands, as well as it produces quarry and mining equipment through Iveco Astra, and fire fighting vehicles through the Iveco Magirus brand. The Powertrain offers transmission systems, engines for marine application and power generation through FPT Industrial brand. Advisors' Opinion:- [By Holly LaFon]
The largest detractor for the quarter was CNH Industrial (CNHI), a global agricultural and construction equipment manufacturer, which fell 11%.� CNH released its nine-month results, which showed revenue growth of 0.6%, but the company�� margins were adversely affected by Iveco, its trucks and commercial vehicles segment.� Iveco�� margins fell short of expectations due to tough pricing, high launch costs, negative mix and increases in bad debt provisions.� Management maintains full-year guidance of 3-4% revenue growth.� We believe improvements in the Iveco division will help CNH Industrial achieve its long-term margin targets.�
10 Best Machinery Stocks To Invest In Right Now: Robogroup TEK Ltd (ROBO)
RoboGroup T.E.K Ltd. is a global, diversified enterprise with proprietary technologies on the forefront of robotics, motion control and technology education. RoboGroup's activities are organized in two related business operations: Yaskawa Eshed Technology (YET) and Intelitek.
YET, a joint venture with Japan's Yaskawa Electric Corp., which provides industrial motion controls, particularly those based on its algorithms. Intelitek, which develops, manufactures and markets training products and e-learning systems. Intelitek�� broad educational product line covers subjects such as computer-aided design, computer-aided manufacturing, configurable network computing, robotics, machine vision, hydraulics, pneumatics, sensors, process control and data acquisition. Intelitek also designs and produces integrated and customized manufacturing workcells, ranging from small-scale flexible manufacturing systems to complete computer integrated manufacturing systems.
Advisors' Opinion:- [By Matt Krantz]
Another way for investors to play the robotics industry is a new exchange traded fund, Robo-Stox Robotics & Automation (symbol: ROBO). The ETF owns a basket of robotics and automation stocks. One major caution, though, is that not all the stocks in the ETF are those investors traditionally think of when it comes to robotics. The largest weighting is in 3D Systems, a maker of a 3D printer, and Faro Technologies, which makes measurement devices. But none of the stocks in the ETF account for more than 4% of the total value, so the diversification helps give investors a way to play the speculative industry.
- [By John Udovich]
Spruce Point Capital Management, LLC has released a research report about small cap robotics stock iRobot Corporation (NASDAQ: IRBT) entitled ��bout to Short Circuit,��meaning investors should take a closer look at the report, the�stock�and the performance of�robotics peer Adept Technology Inc (NASDAQ: ADEP) and�the Robo-Stox Global Robotics & Automation ETF (NASDAQ: ROBO). I should mention that we used to have both Adept Technology and iRobot Corporation in our SmallCap Network Elite Opportunity (SCN EO) portfolio�because we see the�robotics subsector improving as companies aim to reduce overhead and improve efficiencies through machine to machine (M2M) automation.
No comments:
Post a Comment